Clearly Sea Cleaning logoFree estimate
Roof soft washing

Roof soft washing in Brunswick, St. Simons Island and Sea Island

Those black streaks running down the roof are algae feeding on the limestone filler in your shingles, not wear or dirt. We remove them at low pressure with a roof-specific cleaner — no granule loss, no warranty problems, and the roof dries back to its real color.

Licensed and insured · 5.0 stars across 56 Google reviews · Estimates back in one business day

roof-soft-washing-brunswick-ga.jpg

What this service covers

Asphalt and architectural shingle

The most common roof on the coast, and the one algae hits hardest. Low-pressure soft washing lifts the streaks without tearing granules off.

Metal and standing seam

Metal roofs hold a chalky oxidation and algae film. We use a gentle mix that cleans without streaking the finish or dulling the paint.

Valleys and flashing

Where water channels converge, growth builds up fastest. We treat the valleys and flashing so the whole roof reads evenly clean.

Gutter faces and fascia

The black runs down the gutter faces come from the same algae. We clean the roof and the gutter faces in the same visit.

Why we never pressure wash a shingle roof

The ceramic granules on an asphalt shingle are the roof — they protect the asphalt underneath from the sun. High pressure strips them off, shortens the roof's life, and voids the manufacturer warranty. Every shingle maker specifies low-pressure cleaning for exactly this reason. Roof soft washing applies a roof-specific cleaner at very low pressure, lets it dwell, and rinses the dead algae away. The streaks lift out, the granules stay put, and the treatment holds for up to two years.

How a roof soft wash runs

  1. 1
    Inspection

    We check for loose shingles, weak spots and drainage issues before we start.

  2. 2
    Property protection

    Downspouts are managed, plants are soaked, and the area below the roofline is cleared.

  3. 3
    Apply roof cleaner

    A roof-specific detergent mix goes on at low pressure to the affected areas.

  4. 4
    Dwell and rinse

    The solution breaks down algae over several minutes, then we gently rinse it away and tidy up.

Questions about roof soft washing

No. Soft washing uses low pressure — lower than a garden hose — so no granules are knocked loose and the manufacturer warranty stays intact. High pressure is what damages shingles, and we never use it on a roof. The roof-specific cleaner does the work, not force.

Most of the black lifts during the rinse. The rest dies and washes away over the next two to four weeks as rain carries the dead algae off the roof. By the end of a month the roof is back to its original color, and it stays that way for 18 to 24 months.

As little as possible. We work from a ladder at the eaves and from the ground wherever we can reach. When we do step onto a roof, we walk the flat spots and avoid the valleys. Most roofs never get walked on at all.

Every three to five years on the Georgia coast. Heavily shaded roofs over the marsh may need it sooner. A treated roof stays clean far longer than a pressure-rinsed one because the algae is killed at the root, not just blasted off.

Lift the streaks, keep the warranty

Free estimate on a low-pressure roof clean that removes algae without a single lost granule.